Good for in excess of 4,500 meters.( used with the Blackhawk RX antenna and 200mw Tx power))
Handmade Helical 2.4 FPV antenna. UK Made !! (6 turn) good for ground station use.
used for the Receiver side of an FPV RC airplane or multikopter platform.
Better for ground station FPV.
used for point to point in pairs for video transmission like security cameras
This type of antenna is superior to the standard antennas that come with the transmitters.
Has the RP-SMA ( or SMA on request ) male connector which directly screws on to the transmitter and receiver.
Fat shark users should request the SMA version of this set.
Works great with the 2.4Ghz 200mw and 500mw transmitters on the market, and is far better than the standard antennas.
Since it is a circularly polarized antenna, the orientation will not affect video quality. Range is also be much greater.
Technical specifications: Blackhawk.
Two antennas of the same sense must be used together like this new SP and this helical ( both RHCP ) or two helical's with point to point video.
Please make sure you select the correct connector type RP-SMA or SMA ( see other listings )
you MUST PM over any difference request from standard strait connectors.
You have the option for 90 Deg on the SP TX antenna.
See our other listing for cloverleaf matched pair For FPV, 3 Lobe TX, 4 Lobe RX, SMA or RP-SMA available.
Please make sure you select the correct connector type RP-SMA or SMA select from drop
Gain: 13.36 dBi (~5dB at 60° of aperture)
Impedance: 50 Ohms
Band @-1db : 5417 Mhz to 6209 Mhz
Beamwidth ( @-3dB) 34.2°
SWR: < 1.5
Connectors: RP-SMA two sets( or SMA)